


Weber
Genuine Weber Triple 40 DCOE Carburettor Conversion Kit – Datsun 240Z / 260Z / 280Z
Choose options
This Triple Weber 40 DCOE Carburettor Conversion Kit is designed for six-cylinder Datsun Z models, including the 240Z, 260Z and 280Z.
The kit includes three genuine Spanish-made Weber 40 DCOE carburettors, together with a high-quality British-made inlet manifold and all the necessary fittings for installation.
A starting-point calibration is supplied with the kit. Final tuning on a rolling road is required to suit the individual engine setup and achieve optimum performance.
For best results, we recommend using the PAFWFP17303 low-pressure electric fuel pump and PAFAFM4056 mesh air horn filters.
The overall height from the base of the inlet manifold to the top of the carburettors is 230 mm, excluding air horns.
Please note: The photograph shows a 45 DCOE kit and is for illustration purposes only.
Kit Contents
-
1 × Webcon inlet manifold and linkage set
-
3 × Genuine Weber 40 DCOE carburettors
-
1 × Weber tuning manual
-
Billet aluminium plates with O-rings
-
Studs, bolts and nuts
-
Soft mounts
Technical Specifications
-
Carburettors: 3 × Genuine Weber 40 DCOE
-
Inlet manifold manufacture: United Kingdom
-
Vehicle compatibility: Datsun 240Z, 260Z and 280Z
-
Engine application: Six-cylinder
-
Calibration: Starting-point calibration supplied
-
Additional tuning: Rolling road tuning required
-
Overall height: 230 mm, excluding air horns
Inlet Manifold Dimensions
| Measurement | Dimension |
|---|---|
| A to L | 472 mm |
| A to H | 326 mm |
| A to E | 146 mm |
| A to D | 84 mm |
| M centre to B centre | 53 mm |
| M centre to C centre | 64 mm |
| B centre to C centre | 34 mm |
| B centre to F centre | 157 mm |
| J centre to K centre | 34 mm |
| B centre to G centre | 265 mm |
| D to E | 62 mm |
| E to H | 178 mm |
| I to L | 84 mm |
| H to I | 62 mm |
Recommended Accessories
-
Low-pressure fuel pump: PAFWFP17303 – Webcon 12V fuel pump
-
Mesh air horn filters: PAFAFM4056 – Filters for Weber 40 DCOE carburettors
Genuine Weber Carburettors
PAFClassic is an official distributor of Weber carburettors and Webcon products. All carburettors supplied are genuine Weber products, manufactured in Spain at the Magneti Marelli licensed production facility.
With access to more than 11,000 carburettor and spare part references, as well as Weber's technical documentation library, PAFClassic can help source the correct parts for your carburettors.
Choosing genuine Weber products is important. Copies of these well-known carburettors are widely available and may have inconsistent manufacturing quality or compatibility issues with genuine Weber components, including jet sizes. These differences can make accurate carburettor calibration difficult or impossible.


