ATE Brake Master Cylinder Repair Kit 22.2 mm for Ford Capri 2.8 Injection

Seal repair kit for ATE brake master cylinders with a 22.2 mm (7/8") bore.

This ATE brake master cylinder repair kit is intended for Ford Capri 2.8 Injection models fitted with the corresponding ATE master cylinder. It allows worn internal seals to be replaced when refurbishing the hydraulic braking system.

Before ordering, it is essential to confirm the master cylinder manufacturer and bore diameter. Ford Capri models may have different braking systems depending on their specification and production year.

Vehicle Compatibility

• Make: Ford
• Model: Capri Mk III (GECP)
• Engine: 2.8 Super Injection
• Engine capacity: 2,792 cc
• Stated power output: 160 hp / 118 kW
• Fuel type: Petrol
• Transmission: Rear-wheel drive (RWD)
• Listed years: 1981–1987, according to the supplied application data
• Additional stated application: Ford Capri 2.8, 1978–1986, provided it is fitted with the compatible ATE master cylinder

Technical Specifications

• Part type: Brake master cylinder repair kit
• Master cylinder brand: ATE
• Bore diameter: 22.2 mm (7/8")
• Application: Hydraulic brake master cylinder refurbishment
• Function: Replacement of internal cylinder seals

Compatibility Checks Before Ordering

Ford Capri models can be fitted with master cylinders from different manufacturers and with different bore sizes, even within the same model range.

Before purchasing, confirm that your master cylinder is an ATE unit with a 22.2 mm bore. The bore size may be marked on the cylinder body, although identification may require removal and inspection.

Do not rely on the vehicle year or engine specification alone to establish compatibility.

Brake System Safety

The master cylinder is a critical component of the hydraulic braking system. Installation, reassembly and brake bleeding must be performed correctly by a qualified person, and the braking system must be checked thoroughly before the vehicle is driven.